- 17 -
1) Release joint bolt A
2) Remove strainer with screwdriver, and wash
strainer with light gasoline if necessary.
EJM1029S
EJM1030S
1.5.5. Feed Pump Strainer
Strainer
A
1) Release the feed pump cap (1) on the Injection
pump.
2) Release an air bleed nut (2) on the Injection pump.
3) Operate feed pump as visually seeing until
completely remove an air.
4) Tighten air bleed nut (2).
5) Make sure to check leakage of Injection pump
&
filter after operating feed pump many times.
EJM1032S
EJM1054I
1.5.6. Air Bleeding
2
1
To Next Page
Loading...
