20
The DVD Recorder + VCR Setup menu includes six
categories, including: Installation, Recording Options,
Languages, Preference, System Info and Disc
Options. Press [SETUP] and [
…†] on the remote
control unit to view the first and second levels of the
Setup menu.
Setup Menu Overview
Setup menu
Setup menu
1 Press [SETUP]. The Setup menu appears.
2 Use […†] to select the desired category.
3 While the desired category is selected, press [√]
to move to the second level.
4 Press [ENTER] to move to the third level.
5 Use […†] to select the desired setting, then
press [ENTER] to confirm your selection.
Some items require additional steps. Press
[MENU] at any time to return to the previous
menu.
6 Press [SETUP] to exit the Setup menu.
Menu Navigation
Manual Set
To complete the set-up of your DVD Recorder + VCR
when the auto set has not stored all of the channels or
when you wish to store a new channel.
1 Press [SETUP]. The Setup menu appears.
2 Use […†] to select ‘Installation’ and press
[ENTER] to confirm.
3 While ‘Installation’ is selected, press […†] to
select ‘Manual Set’.
4 Press [ENTER]. The ‘Manual Set’ menu appears.
5 Use […†] to select ‘Standard’.
6 Use [œ√] to select the desired ‘Standard’ (PAL-
BG, PAL-II or PAL-DK).
7 Use […†] to select ‘Reception’.
8 Use [œ√] to select the desired broadcast system
(Antenna or Cable).
Antenna: If you are using a standard antenna to
receive channels.
Cable TV: If you are using basic cable to receive
channels.
9 Use […†] to select ‘Auto Search’.
10 Search the real channel number by pressing [œ
√
].
11 Select ‘Fine Tune’. You can adjust the fine tuning.
INSTALLATION Settings
Installation
Confirm Back Exit
ENTER MENU SETUP
†
†
†
Manual Set
Auto Set
Clock Setting
Adjust Channels
Installation > Manual Set
Confirm Back Exit
ENTER MENU SETUP
Standard PAL-II
Reception Antenna
Auto Search 2
Fine Tune 0
Decoder OFF
Store Channel PR-1
Program Name - - - -
†
†
This set is equipped with a Multi-Tuner. You can
search broadcasts when in other countries. If the set
can not search the channels, please Re-Install. (see
page 19.)
Installation > Manual Set
Confirm Back Exit
ENTER MENU SETUP
Standard PAL-II
Reception Antenna
Auto Search 2
Fine Tune 0
Decoder OFF
Store Channel PR-1
Program Name - - - -
†
†
Installation > Manual Set
Confirm Back Exit
ENTER MENU SETUP
Standard PAL-II
Reception Antenna
Auto Search 2
Fine Tune 0
Decoder OFF
Store Channel PR-1
Program Name - - - -
†
†
DF-H3512P-UL¿ 2008.1.25 5:21 PM ˘ ` 20 mac001 1200DPI 100LPI
To Next Page
Loading...
