Daewoo DLP-26C2 - Selection of AV and Multimedia Input Signal

Selection of AV and
Multimedia Input Signal
31
- See page 12 for connection method of Camcorder and Video.
- When pressing
””
button on the TV set, screen changes as follows:
TV => AV1 => AV2 => AV3/S-Video => PC => HDMI => Component => TV
Note :
Cautions in menu setup
• The menu disappears if you do not operate any button for 30 seconds from the menu.
• Don’t connect the composite video signal and S-video signal to the video input terminal AV1/AV2 at
the same time. If connecting both signals at the same time, the S-video takes precedence.
• If sound signal is mono only, connect it to the L-terminal of the sound input terminal.
PR 19
Mono
Clock 12 : 00
PR 19
AV1
Clock 12 : 00
PR 19
Clock 12 : 00
AV3 / S-Video
PR 19
AV2
Clock 12 : 00
When watching video, Camcorder, DVD, Cable TV with AV
1.
Pressing the “ ”(AV) button on the remote controller.
• The screen changes as follows:
TV => AV1 => AV2 => AV3/S-Video => TV
MUTE
PICTURE
ASPECT
SOUND
POWER
RECALL
MULTIMEDIA
VV
PR