Daewoo DLP-32C5 - When Connecting with a Hdmi Cable; PC Connection

PC
Connection
16
INPUT
HDMI 1 HDMI 2
COMPONENT
PC INPUT
OPTICAL
Pr Pb Y
R - AUDIO - L
PC AUDIO
DIGITAL
AUDIO
AV1 AV2
1. First adjust resolution of the PC. (Refer to table in page 17.)
2. Then disconnect your monitor from your PC and connect between PC and TV set using the D-sub and
Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4. select PC mode by pressing “MULTIMEDIA” button on the remote control or
” ” button of the TV set.
INPUT
HDMI 1 HDMI 2
COMPONENT
PC INPUT
OPTICAL
Pr Pb Y
R - AUDIO - L
PC AUDIO
DIGITAL
AUDIO
AV1 AV2
1. First adjust resolution of the PC. (Refer to table in page 17.)
2. Then disconnect your monitor from your PC and connect between PC and TV set using the HDMI and
Audio cable as shown in the picture below, if necessary. See note below.
3. Turn on the PC and TV set.
4. select HDMI mode by pressing “MULTIMEDIA” button on the remote control or
” ” button of the TV set.
When connecting with PC(D-Sub) cable.
When connecting with a HDMI cable.
Note : If the graphic card of the PC only supports a DVI signal, you must connect the Audio cable as shown in the
picture upper.
BACK OF THE TV SET
BACK OF THE TV SET