Installation
21
How to Copy(Edit) Tape with Other VCR or Camcorder
¡ Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack in rear panel
(or front panel) of DVD-Video with connecting cable.
™ Connect “ANT. IN” jack in TV to “RF.OUT” jack in DVD-Video with RF cable.
£ To record contents of camcorder or playback video with DVD-Video, insert recording tape attached recording
tab in DVD-Video.
¡ Turn on DVD-Video.
™ Press [OUTPUT] button of remote control and adjust DVD-Video to display “External Input 1” or “External Input
2” in TV screen.
£ Press [PLAY] button in Camcorder or playback video.
¢ Press [REC] button in DVD-Video if you want to record contents of camcorder or playback video.
∞ Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording.
(Caution) Recording is released automatically after 5 minutes since pressing [PAUSE] button. Press [REC]
button if you want to record again.
How to Playback Chapter Photographed by Camcorder
¡ Turn DVD-Video on.
™ Press [OUTPUT] button of remote control and adjust DVD-Video to display “External Input 1” or “External Input
2” in TV screen.
£ Insert tape in camcorder and playback it.
DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ˘`21
To Next Page
Loading...
