Problem
GENERAL
Tape won't go in the slot.
Operation keys don't work.
Emergency indicator is blinking.
Motor in VCR is operating
Check
Is there another tape already in the VCR?
Are you loading the tape correctly, i.e., with the label
side up?
The REW/REV functions don't work at the very
beginning of a tape and the FF/CUE, PLAY and REC
functions do not work at the end of a tape.
Unplug and replug the power cord to clear the
. signal. If the emergency indicator continues to blink,
contact a service technician.
Please turn off VCR or eject a cassette in VCR.
36.
To Next Page
Loading...
