Washing procedure and program selection (cont.)
NOTE
• Only ‘Cold’ washing temperatures is selectable with Rinse+Spin Program.
1
Put the laundry into the Drum and put softener into the detergent case.
Then close the Door.
• Softener should be below ‘MAX’ level.
2
Press the Power button.
• The LED shows only ‘- --’ signal.
3
Select the 'RINSE+SPIN' program using program selection dial.
• ‘800’ rpm spin speed is selected automatically.
• If you want to change Spin condition, press each corresponding button.
4
Press the ‘Start/Pause’ button.
• The washer will be operated with locking Door.
* RINSE+SPIN PROGRAM
To Next Page
Loading...
