Washing procedure and program selection (cont.)
NOTE
• If you want to change the setting during operation, press the Start/Pause button to hold the operation and press
the button you want.
• Only ‘40°C’, '60°C' washing temperatures is selectable with Cotton Eco Program.
• COTTON ECO + 60°C + Max rpm is suitable for a normally soiled load and tested in accordance
UAE.S IEC 60456.
1
Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
• Put detergent into the main wash compartment in the detergent case.
Softener should be below the ‘MAX’ level.
• Put detergent into the prewash compartment only if you want to add prewash.
• When you want to use bleach, put it into the main wash compartment with
detergent.
2
Press the Power button.
• The LED shows only ‘- --’ and all Program Lights turn on.
3
Select ‘Cotton Eco’ program using program selection dial.
• Washing temperature ‘60’ °C, spin ‘1200’ rpm are selected automatically.
4
Press Start/Pause button.
• The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
* COTTON ECO PROGRAM
To Next Page
Loading...
