Washing procedure and program selection (cont.)
1
Put the laundry into the Drum, Then close the door.
The close the door.
2
Press the Power button.
• The LED shows only ‘- --’ signal.
3
Select the ‘Air Refresh program using program selection dial.
• Dry option ‘Low’ is selected automatically.
4
Press Start/Pause button.
• The washer will be operated with locking door supplying water after sensing the
amount of laundry automatically.
* AIR REFRESH PROGRAM
NOTE
• Air refresh is for disinfect or deodorize.
To Next Page
Loading...
