To Next PageTo Next PageWhat to do if my Daewoo DWD-F1011 leaks water?
If your Daewoo Washer is leaking water, check and tighten the inlet and drain hose connections at both the tap and the washer itself. Additionally, inspect your house drain pipes for clogs and unclog them. If the problem persists, it may be necessary to contact a plumber.
What does LE error mean on my Daewoo DWD-F1011?
To fix the LE DOOR OPEN ERROR on your Daewoo washer, ensure the door is closed, especially if the Start/Hold button was pressed while the door was open. If the error continues, the switch door lock or the PCB ASS’Y may need to be replaced.
What to do if my Daewoo DWD-F1011 does not start?
If your Daewoo Washer won't start, ensure the power cord is securely plugged into the wall outlet. A loose connection can prevent the washer from starting. Also, check your house fuse or circuit breaker. If a fuse is blown or the breaker is tripped, reset the breaker or replace the fuse. Finally, make sure that the water supply tap is turned on.
What does E6 error mean on my Daewoo DWD-F1011 Washer?
To fix the E6 EMG ERROR on your Daewoo washer, first rearrange the laundry if it is jammed between the gasket and the drum. If the error continues, the motor or the PCB ASS’Y may need to be replaced.
What does H8 error mean on my Daewoo DWD-F1011?
To address the H8 HEATER WASH OVERHEATING ERROR on your Daewoo washer, check the water level and the heater wash.
How to troubleshoot E6 EMG ERROR on Daewoo Washer?
To resolve the E6 EMG ERROR on your Daewoo Washer, rearrange the laundry to ensure it is not jammed between the gasket and the drum. If problems persist you should change the motor or the PCB ASS’Y.
What to do if my Daewoo DWD-F1011 Washer shows a drain error?
If your Daewoo Washer is displaying a drain error, it could be due to several reasons. First, check the drain hose for any kinks or clogs and clean or straighten it. Other potential causes include a defective drain motor, valve inlet, or water level sensor, all of which would require replacement. It's also possible that the PCB ASS’Y is not checking the water level, which would also require replacement.
What to do if the Daewoo DWD-F1011 door does not open?
If your Daewoo Washer door won't open, wait two minutes to allow the electric locking mechanism to release after the cycle has stopped. The door is designed to remain locked for safety reasons once a cycle has started.
Why does my Daewoo DWD-F1011 Washer not start?
If your Daewoo Washer isn't starting, ensure the power cord is securely plugged into the wall outlet. Also, check your house fuse or circuit breaker; reset the breaker or replace the fuse if necessary, without increasing its capacity. If a circuit overload is the issue, consult a qualified electrician. Finally, make sure the water supply tap is turned on.
How to fix a Daewoo DWD-F1011 that won't drain?
If your Daewoo washer isn't draining water, or is draining slowly, inspect the drain hose for kinks or clogs and clean and straighten it. Also, check the drain filter for clogs and clean it.
General| Loading type | Front loading |
|---|---|
| Capacity | 6 kg |
| Washing capacity | 6 kg |
| Maximum spin speed | 1000 RPM |
| Dimensions (H x W x D) | 85 cm x 60 cm x 55 cm |
| Noise Level (Washing/Spinning) | 58 dB / 76 dB |
| Color | White |
| Type | Washer |
| Water Consumption | 49 L |
