What to do if my Daewoo Washer is making a vibrating noise?
If your Daewoo washer is making a vibrating noise, check if all the transit bolts and packing have been removed. If not, refer to the Installation guide for removing transit bolts. Also, make sure all the feet are resting firmly on the ground. An uneven wash load may also cause vibration; stop the washer and rearrange the load.
What causes a leakage error in my Daewoo Washer?
A leakage error in your Daewoo Washer is caused by water leaking from the tub or the drain hose. Check both for leaks, and then change the tub or the drain hose.
What to do if my Daewoo DWD-F1021 shows OE DRAIN ERROR?
To resolve the OE DRAIN ERROR on your Daewoo Washer, clean and straighten the drain hose. If problems persist you should change the drain motor, valve inlet, water level sensor or the PCB ASS’Y.
How to fix E4 LEAKAGE ERROR on Daewoo DWD-F1021 Washer?
To resolve the E4 LEAKAGE ERROR on your Daewoo Washer, check for leaks in the tub or the hose drain. Then change the tub or the hose drain.
How to fix E9 SENSOR PRESSURE ERROR on Daewoo DWD-F1021 Washer?
To resolve the E9 SENSOR PRESSURE ERROR on your Daewoo Washer, you should change the water level sensor.
How to fix H5 WATER TEMP. ERROR on Daewoo Washer?
To resolve the H5 WATER TEMP. ERROR on your Daewoo Washer, you should change the thermistor wash.
How to fix PFE PUMP FILTER ERROR on Daewoo Washer?
To resolve the PFE PUMP FILTER ERROR on your Daewoo Washer, clean the drain pump filter. If problems persist you should change the drain pump. Also use the proper amount of detergent and place the drain hose 1m below the floor.
What causes H4 THERMISTOR WASH OVERHEATING ERROR on Daewoo DWD-F1021?
The H4 THERMISTOR WASH OVERHEATING ERROR on your Daewoo washer can occur if the heater worked without water in the tub; check the water level. Alternatively, the thermistor wash may be faulty and require replacement.
What does IGBT error mean on my Daewoo DWD-F1021?
An IGBT error on your Daewoo Washer indicates that the PCB ASS’Y is defective and needs to be replaced.
What does high voltage error mean on my Daewoo DWD-F1021?
A high voltage error on your Daewoo Washer can be caused by laundry being jammed between the gasket and the drum; rearrange the laundry. It can also indicate a defective PCB ASS’Y, which would require replacement.
Lists available accessories for the washing machine.
Outlines user duties for safe operation and maintenance of the washer.
Step-by-step guide to remove transit bolts before operating the washer.
Instructions on choosing the correct location and ensuring proper installation.
Procedure for connecting the inlet hose to a standard water tap.
Procedure for connecting the inlet hose to a screw-shaped water tap.
Critical safety warning about electrical shock risks and precautions.
Details the proper grounding procedure for personal safety.
Instructions on connecting and positioning the drain hose for proper drainage.
Steps to ensure the washer is level to prevent noise and malfunction.
Tips on preparing laundry items to ensure optimal washing results and protect the machine.
Explains the purpose and operation of various buttons on the control panel.
Details the default Cotton program that starts upon powering on the washer.
Guide on how to manually select wash courses and settings.
Instructions on how to schedule a wash cycle for a later time.
Recommended settings and options for washing cotton fabrics.
Information on the Eco program for energy-efficient washing.
Guidelines for washing synthetic fabrics like polyamide and acrylic.
Instructions for washing delicate items such as silk and curtains.
Specific recommendations for washing wool garments safely.
How to use the Hand Wash program for sensitive laundry.
Information on the Quick 30 program for fast washing cycles.
Instructions for cleaning the exterior and interior of the washing machine.
Guidance on preparing the washer for storage during cold weather or for moving.
Recommendations for protecting the washer during extended periods of non-use.
Steps to clean the filter where the water inlet hose connects.
Instructions for cleaning the drain filter to prevent blockages.
How to clean the detergent and fabric softener dispenser.
General guidelines and precautions for effectively removing various types of stains from laundry.
Solutions for common error codes like IE, OE, UE, and PFE displayed on the control panel.
A guide to identify and resolve typical issues such as no operation, no water, or excessive noise.
Key technical data including dimensions, weight, capacity, and performance ratings.
A schematic illustrating the electrical connections within the washing machine.
Contact details and information about VISION CREATIVE, INC., the manual's publisher.
General| Model | DWD-F1021 |
|---|---|
| Brand | Daewoo |
| Tub Material | Stainless Steel |
| Control Type | Electronic |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Type | Front Load |
| Dimensions (H x W x D) | 850 x 600 x 550 mm |
| Dimensions (W x D x H) | 600 x 550 x 850 mm |
To Next Page
