G420E/G424E Tier LP Engine N2001 Regulator/Converter 63
SENSOR POINT TO POINT EXPECTED RANGE
VR SENSOR
VR PIN 1 (+) TO PIN 2 (-) ~320Ω
COIL PIN A (SIGNAL) TO PIN B ~10KΩ
COIL PIN A (SIGNAL) TO PIN D ~34KΩ
COIL PIN A (SIGNAL) TO PIN E
(PWR)
~15KΩ
COIL PIN B TO PIN D ~44KΩ
COIL PIN B TO PIN E (PWR) ~26KΩ
SMART COIL
COIL PIN D TO PIN E (PWR) ~17KΩ
CONNECTOR POINT TO POINT EXPECTED RANGE
FTV
(FUEL TRIM VALVE)
FTV PIN A (SIGNAL) TO PIN B
(PWR)
(~26Ω +/-2Ω)
CONNECTOR POINT TO POINT EXPECTED RANGE
FUEL LOCK-OFF
LOCK-OFF PIN A (PWR) TO PIN B
(GND SIGNAL)
~20-25Ω
Voltage Checks
SENSOR POINT TO POINT EXPECTED RANGE
APP1: PIN B (SIGNAL A) TO PIN C
(GND)
0.4 +/- 0.1V AT LOW IDLE
3.6 +/- 0.15V AT FULL ACCEL
ACCELERATION PEDAL ANGLE
SENSOR
APP2: PIN E (SIGNAL B) TO PIN
D (GND)
4.5 +/- 0.1V AT LOW IDLE
1.4 +/- 0.15V AT FULL ACCEL
Note: When you check the output voltage of acceleration pedal angle sensor, it must be connected to SECM so
that SECM can supply 5V to the angle sensor.
To Next Page
Loading...