Maintenance Section
-169-
Wheel Bolts & Nuts - Inspect
Inspect Tightness (D, G - Series)
Steer Wheels
Typical Example
1. Inspect tightness of wheel bolts in a sequence
opposite each other 110 N•m (75 lb•ft).
Drive Wheels
Typical Example
2. Inspect tightness of wheel nuts in a sequence
opposite each other to 610 N•m (450 lb•ft).
Inspect Tightness (GC - Series)
Drive Wheels
Typical Example
1. Inspect tightness of wheel bolts in a sequence
opposite each other to 245 N•m (180 lb•ft).
To Next Page
Loading...
Need help?
General
