12
CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash “ :0” and a tone will sound. If the AC power
ever goes off, the display shows “ :0” when the power comes back on.
1. Touch CLOCK pad.
This is a 12 hour clock system.
2. Touch CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by touching the
numbers in sequence.
4. Touch CLOCK pad.
The display stops blinking, and the colon starts
blinking. If you selected 12 hour clock system,
this digital clock allows you to set from 1:00 to
12:59. If you selected 24 hour clock system, this
digital clock allows you to set from 0:00 to 23:59.
NOTE : This oven has multiple clock
systems. If you want 12 hour
clock system, omit this step.
CHANGING THE DISPLAY TIME
When you want to change ~
1. TOAST cooking time to M/W cooking time, touch M/W pad.
2. M/W cooking time to TOAST cooking time, touch BREAD or
BAGEL pad.
3. TOAST cooking time to M/W delay or holding time, touch KITCHEN
TIMER pad.
To Next Page
Loading...
Need help?
General
