DAF CF65 - Page 103

©
200518 5-7
Draining and filling
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΧΦ65/65 (II) series
5
3. Fill the oil through level check/filler opening
(1) until the oil reaches the rim of the filler
opening.
4. Fit the level check/filler plug, tightening it to
the specified torque; see "Technical data".
Allison MD3060P automatic gearbox
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
Draining the gearbox
1. Bring the gearbox to operating temperature
(approx. 71C - 93C) to allow the oil to drain
more quickly and more fully.
2. Place the vehicle on a level and horizontal
surface.
3. Remove the drain plug (1) from the gearbox
oil sump.
4. Remove the oil filters (2) (see chapter
"Removal and installation").
Filling the gearbox
1. Clean the drain plug (1) and, fitted with a new
sealing ring, tighten it to the specified torque;
see "Technical data".
2. Fit the oil filters (2) (see chapter "Removal
and installation").
3. Fill the gearbox through the dipstick holder
with the specified oil quantity; see "Technical
data".
}
V300371
2
1
W 3 03 098
https://www.truck-manuals.net/