DAF CF65 - Page 15

©
200518 3-3
Drive and chassis
TECHNICAL DATA
ΧΦ65/65 (II) series
0
Allison gearbox
CF65 front axle
(1) Evenly tighten the two U-bolt nuts alternately.
(2) The yellow zinc-plated hexagonal nut can be identified by
the nut height, which is 1 x thread . Evenly tighten the
two U-bolt nuts alternately.
CF65 (II) front axle
CF65 rear axle
(1) Evenly tighten the two U-bolt nuts alternately.
(2) The yellow zinc-plated hexagonal nut can be identified by
the nut height, which is 1 x thread . Evenly tighten the
two U-bolt nuts alternately.
(3) The high hexagonal nut can be identified by the nut
height, which is 1.5 x thread . Evenly tighten the two
U-bolt nuts alternately.
V300371
2
1
Drain plug (1) 28 Nm
Oil filter cover attachment
bolts (2) 55 Nm
U-bolt nut, if flange nut M20, with yellow washer 450 Nm
(1)
U-bolt nut, if yellow zinc-plated hexagonal nut
M20, property class 10, with black washer 400 Nm
(2)
U-bolt nut 537 Nm
U-bolt nut (leaf suspension), if flange nut M24,
with black washer 750 Nm
(1)
U-bolt nut (leaf suspension), if yellow zinc-plated
hexagonal nut M20, property class 10, with black
washer 615 Nm
(2)
U-bolt nut (air suspension), if black high hexago-
nal nut M24, property class 10, with black washer 770 Nm
(3)
U-bolt nut (air suspension), if yellow zinc-plated
hexagonal nut M20, property class 10, with black
washer 615 Nm
(2)
https://www.truck-manuals.net/