TECHNICAL DATA
3-2
©
200518
Drive and chassis
0
ΧΦ65/65 (II) series
3.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
ZF 6S-850 gearbox
Eaton 6309 A gearbox
B
M3038
A
Level check/filler plug (A) 50 Nm
Drain plug (B) 50 Nm
1
2
3
4
V3 00 376
Level check/filler plug (1) 35 Nm
Drain plug/oil strainer (4) 44 Nm
https://www.truck-manuals.net/
To Next Page
Loading...
