1
LF45/55 series Removal and installation
EXTERNAL CAB COMPONENTS
4-25
4.21 REMOVAL AND INSTALLATION, HEADLIGHT LEVELLING CONTROL
Removing headlight levelling control
1. Tilt the cab forwards.
2. Remove the connectors from the headlight
levelling control.
3. Remove the headlight levelling control by
turning it fully anti-clockwise out of the back
of the headlight (at the rear).
Installing headlight levelling control
1. Fit the headlight levelling control by
screwing it clockwise into the bayonet
catch.
2. Fit the headlight levelling connector.
3. Tilt the cab back.
K1 01 100
4.22 REMOVAL AND INSTALLATION, MUDGUARD ASSEMBLY
Removing mudguard assembly
1. Tilt the cab forwards.
2. Remove attachment bolts and nuts
(1 and 2).
3. Remove the mudguard assembly.
Installing mudguard assembly
1. Fit the mudguard assembly.
2. Fit the attachment bolts (1 and 2).
3. Tilt the cab back.
1
2
K1 01 158
4
ǹ 0210
https://www.truck-manuals.net/