DAF LF55 Series - Removal and Installation: Cab Tilting Pump

1CAB TILTING GEAR
Removal and installation LF45/55 series
4-2
4.2 REMOVAL AND INSTALL ATION, CAB TILTING PUMP
Removing cab tilting pump
1. Remove all dirt and grease from the pump.
2. Place a receptacle beneath the pump to
capture any escaping fluid.
3. Mark the pipes and take them out of the
pump holder, plug the ends of the pipes to
prevent dirt getting in.
4. Remove the nuts and attachment bolts that
connect the pump to the chassis bracket,
and remove the pump.
Installing cab tilting pump
1. Install the cab tilting pump. Secure the cab
tilting pump with the attachment bolts.
2. Fit the pipes.
3. For filling (1) and bleeding, see “Draining
and filling”.
1
K1 01 105
6
ǹ 0210
https://www.truck-manuals.net/