1
LF45/55 series Removal and installation
INTERNAL CAB COMPONENTS
4-21
Installing the steering column with airbag
steering wheel
1. Check that the steering box is still in the
central position, using the marks.
S7 00 623
2. Fit the steering column to the steering shaft
and make sure that the marks between the
universal joint and steering shaft align.
Fit a new attachment bolt with nut in the
universal joint.
Tighten the attachment bolt to the specified
torque, see main group ”Technical data”.
3. Place the steering column by tightening the
top attachment bolts by hand.
4. Attach the air pipes to the connection block
behind the dashboard. Check to see that
the air pipes are not in contact with any
moving parts.
5. Fit the steering column connectors.
6. Fit the lower attachment bolts and lock the
steering column.
7. Fit the steering column panel and secure it
with the attachment bolts and panel clips.
8. Fit the panel.
9. Fit the airbag module.
2
ǹ 0210
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
