EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
4-10
©
200423
Removal and installation
5
ΞΦ95 series
4.8 REMOVAL AND INSTALLATION, VALVE COVER
When the engine or parts thereof are
opened, dirt may penetrate. This
may cause serious damage to the
engine. Therefore, the engine should
be cleaned thoroughly before any
parts are opened.
Removing the valve cover
1. Clean the area around the valve cover.
2. Remove the attachment bolts from the valve
cover.
3. Remove the valve cover and the valve cover
gasket.
Installing the valve cover
1. Clean the sealing surface of the valve sleeve
and the valve cover.
2. Fit the valve cover using a new valve cover
gasket.
3. Fit the attachment bolts of the valve cover
and tighten them to the specified torque. See
the main group "Technical data".
Steering g ear and brake syst em
}
To Next Page
Loading...
