DAF XF95 - Inspection, Brake Lining Thickness

©
200423 3-21
Inspection and adjustment
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΞΦ95 series
5
3.26 INSPECTION, BRAKE LINING THICKNESS
Inspecting the brake lining thickness (FTP
axle excepted)
1. Pressurise the air brake system (pressure
regulator should cut out) and make sure that
the vehicle's parking brake is not engaged.
2. Check the brake lining thickness through the
openings in the dust cover.
3. Replace the brake lining if it is worn down to
the wear indicator mark on the lining.
Note:
If in doubt about the amount of brake lining
wear, release the brakes and remove the
dust cover.
Inspecting the brake lining thickness (FTP
axle)
1. Pressurise the air brake system (pressure
regulator should cut out) and make sure that
the vehicle's parking brake is not engaged.
2. Check the brake lining thickness through the
openings in the dust cover.
3. Replace the brake lining if it is worn down to
the wear indicator mark on the lining.
Note:
If in doubt about the amount of brake lining
wear, release the brakes and remove the
dust cover.
M6012
M6002
R6 00 677