MAINTENANCE SCHEDULE
1-2
©
200423
Maintenance intervals
4
ΞΦ95 series
1.2 EXPLANATORY NOTES ON THE MAINTENANCE SCHEDULE
Maintenance group classification
Depending on the use to which the vehicle is put,
the vehicle is placed in maintenance group I, II
or III.
Maintenance group I
Operation on building sites, in quarries, etc.
- Operation on unmetalled roads
- Traffic in dusty conditions
- Sanitation department vehicles
- Distribution transport with an annual mileage
up to 30,000 km.
Maintenance group II
Urban and regional transport
- Distribution traffic in urban areas
- Traffic between adjacent villages/cities
Maintenance group III
(Inter)national traffic
- Long-distance/very long-distance traffic
Standard changing interval
This is the standard changing interval symbol.
See the "Fluids and lubricants" specifications
manual for the prescribed oil specification.
Extended changing interval
This is the extended changing interval symbol.
If the prescribed oil specification and any
additional conditions (see specification manual
"Fluids and lubricants") are complied with, an
extended changing interval may be applied.
Note:
An extended changing interval for engine oil may
be subject to additional conditions. The additional
conditions are included in the "Fluids and
lubricants" specification manual.
G0 00 230
Ext.
G0 00 229
To Next Page
Loading...
Need help?
General
