©
200423 3-31
Inspection and adjustment
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΞΦ95 series
5
3.33 CHECKING THE OPERATION OF THE DIFFERENTIAL LOCK
1. Jack up the rear axle and support the axle on
stands.
2. Bring the air system to operating pressure.
3. Engage the differential lock. The warning
indicator should now be active.
4. Check that there is a "rigid" connection
between the driven wheels.
5. Disengage the differential lock. The warning
light should now go out and the "rigid"
connection between the driven wheels
should be broken.
To Next Page
Loading...
