©
200423 1-1
Specifications
FLUID, OIL AND LUBRICANTS
ΞΦ95 series
3
1. SPECIFICATIONS
1.1 GENERAL
IN ORDER TO SATISFY THE WARRANTY
CONDITIONS AND GUARANTEE THE
LIFESPAN, SAFETY AND RELIABILITY OF
DAF PRODUCTS, IT IS OF THE UTMOST
IMPORTANCE THAT THE CORRECT FLUIDS,
OIL AND LUBRICANTS, COOLANT AND FUEL
ARE USED AND THAT THE REQUIRED
REPLACEMENT INTERVALS ARE
OBSERVED.
Lubricant, engine coolant and fuel additives - of
whatever type - must not be used except in those
circumstances specified by DAF.
Always follow the safety instructions below and
the instructions that are supplied with the product.
Ask your lubricant and fuel supplier(s) whether
the products supplied comply with DAF
specifications.
DAF is not liable for damage or problems in
the following instances:
1. use of oil of a lower grade than specified.
2. use of oil of a different viscosity than
specified.
3. if the change interval is exceeded.
4. if fuel, lubricants or coolants have been
used which do not meet the requirements
specified by DAF.
To Next Page
Loading...
