EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
3-4
©
200423
Inspection and adjustment
5
ΞΦ95 series
3.6 INSPECTION, ENGINE OIL LEVEL
1. Ensure that the vehicle is standing on a flat
and level surface.
2. Wait at least 5 minutes before checking the
engine oil level of a hot engine.
3. Pull the dipstick (2) out of the holder.
4. Wipe the dipstick clean with a lint-free cloth.
5. Put the dipstick back into the holder.
6. Pull the dipstick out again and check the oil
level.
7. If necessary, top up oil via the filler opening
with the red cap (D) to the maximum oil level.
Always use the specified oil.
Do not top up above maximum level.
Note:
For the difference between minimum and
maximum engine oil level, see "Technical
data".
V300384
2
V300389
D
To Next Page
Loading...
