Configuration Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
7. Here we should set an IP
address for the IVSS server
network card 1.
Click the icon as shown to set
8. We are setting the IVSS to be
192.168.1.100 as an example.
We just need to make sure
camera is in the same range
192.168.1.xxx
Click ”Next”
9. P2P function is not nessesary
to set, it is for push
functionallity, and internet
connection is required for it to
work.
Click ”Next”
4. Confirm timezone, set time
and date.
Click ”Next”
5. Choose a password that
contains a between 8-32 Digits
consisting of letter(s) and
number(s), symbol(s) at least
two types.
Click ”Next”
6. Enter an Email ( not the
shown in the picture) to be
able to recover the admin
password.
It is also possible to choose
security questions, and answer
accordingly to reset password.
19
To Next Page
Loading...