Configuration Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Add camera and configure perimeters
12. Click the ”+Add” Button to
add a camera.
13. Click ”Search” to find the
camera connected, it might
take a couple of second, wait
till the search is finnished
before trying to initializing the
camera.
14. Now ”Click” the tag button
on the camera and click the
Initialize button.
10. Next part is to add the
camera to the IVSS, Click the
“gear” in the top right as
shown.
11. Click the ”Device” menu.
20
To Next Page
Loading...
Need help?
General