User’s Manual
5
6 Configuration
You can view and edit general information of the keypad.
6.1 Viewing Status
On the hub screen, select a keypad from the accessory list, and then you can view the status of the
keypad.
Table 6-1 Status
Parameter Value
Temporary Deactivate
The status for whether the functions of the keypad are enabled or
disabled.
●
: Enable.
●
: Only disable tamper alarm.
●
: Disable.
Temperature The temperature of the environment.
Signal Strength
The signal strength between the hub and the keypad.
●
: Low.
●
: Weak.
●
: Good.
●
: Excellent.
●
: No.
Battery Level
The battery level of the keypad.
●
: Fully charged.
●
: Sufficient.
●
: Moderate.
●
: Insufficient.
●
: Low.
Anti-tampering Status
The tamper status of the keypad, which reacts to the detachment
of the body.
Online Status
Online and offline status of the keypad.
●
: Online.
●
: Offline.
Lock Status
The status for whether the keypad is locked or not.
●
: Locked.
●
: Unlocked.
Transmit through Repeater
The status of whether the keypad forwards its messages to the hub
through the repeater.
Program Version The program version of the keypad.