User’s Manual
9
On the
User Manager
screen, select the user, and then swipe left to delete the user.
The admin user must be the last to be deleted.
●
Modifying User's Information
On the
User Manager
screen, select the user, and then you can modify user's information,
including username, passcode, duress code and arming and disarming permission.
7.2 Adding Card
You can add, modify, or delete the card when the keypad is disarmed. There are 2 ways to add the
card.
●
Adding the card on the
User Manager
.
●
Adding the card in the accessory list.
Only installer and admin users have permission to add the card.
7.2.1 Adding Card on the User Manager
Step 1 Go to the home screen.
Step 2 Select a hub, and then select >
D
evice Details
>
Hub Setting
>
User Manager
.
Step 3 Select the user to whom you want to link the card.
Step 4 Tap .
Step 5 Press any key to wake up the keypad, and then place the card near the card swiping area of
the keypad to enter to the linking process within 30 seconds.
If the card information is successfully recognized, the card ID will be displayed on the app,
and the keypad will beep once. After you save the configurations, the card will have the
user's permissions.
Up to 8 cards can be linked to a user.
7.2.2 Adding Card in the Accessory List
Step 1 Go to the hub screen.
Step 2 Select
Accessory
.
Step 3 Tap , and then select
Add Card
.
Step 4 Press any key to wake up the keypad.
Step 5 Place the card near the card swiping area of the keypad to enter to the linking process.
Step 6 On the
Linked User
screen, you can select whether to create a new user, or link the card to
the added user.
If you select to create a new user, tap
Create User
. For details on adding a user, see "7.1
Adding Users".
To Next Page
Loading...
Need help?
General