Basic Operations 9
4 Basic Operations
The Signage’s operation system is developed based on the Android OS. You can connect the
Signage to the online platform of information release & management. Then you can use the
platform to release a multi-media program to the Signage, turn on/off the Signage and reboot
the Signage. You can implement the operations such as local release, app management and
system setting.
Booting Up and Shutting Down 4.1
Before booting up the Signage, check if input voltage matches rated voltage of the Device.
Refer to international standard to offer the power input (power input that is with stable
power value and less interference) to ensure the device works stably and prolong its
service life.
To boot up the Signage: Plug the power line into a socket.
To shut down: Unplug the line.
Initializing Signage 4.2
When you are opening the Signage for the first time or you have allowed your system to be
restored the factory settings, you need to initialize the Signage. Only after that can you operate
and configure your Signage.
Plug the Signage’s power line into a socket. Step 1
The Signage boots up and the Device Initialization interface is displayed. See Figure
4-1.
The device initialization interface Figure 4-1
Type your screen lock password and type it again to confirm it. Step 2
Click Done on your virtual keyboard. Step 3
Click Confirm on the Device Initialization interface.
Initialization begins. After that, the main menu is displayed. See Figure 4-2.