4.1.2 Face Mask Detection
Step 3: Click Alarm on the top right
hand corner if you want to review the
type and details of any recorded alarms.
Click Draw Rule on the left hand side
and use the mouse to draw a line for the
target on the scene and set the parameter.
Click Save in the bottom right hand
corner to complete.
From this moment onwards an alarm will
be activated if the line is crossed.
Page 11
QUICK START GUIDE | TiOC Solution
Step 1: Login to the camera, go to
Setting > Event > Smart Plan ,
click Face Detection to activate the
function and click Save .
Step 2: Go to Setting > Event >
Face Detection , click the green Enable
on the top right hand corner to enable
the function.
Click Draw on the left hand side to draw
the region for face detection by using the
mouse to draw a shape for the target on
the scene and set the parameter.
Click Save at the bottom right hand
corner to complete.
To Next Page
Loading...
Need help?
General