Step 1: Login to the camera, go to
Setting > Event > Smart Plan ,
click IVS to activate the function
and click Save .
4. Key function configuration
4.1 For the camera-only system
4.1.1 IVS
Page 10
QUICK START GUIDE | TiOC Solution
You can also manually add the camera by
typing the target IP address, user name and
password.
If the camera has been added successfully
the new camera will be shown as the last of
the added devices.
Right click back to the screen and the
camera images will be displayed.
Step 2: Go to Setting > Event > IVS , click the green + on the top
right hand corner to add new rules.
To Next Page
Loading...