User’s Manual
185
Search result
5.11.2 Configuring Face Detection
You can configure the face detection settings and search the detected faces in the defined time period.
Not all models support this function.
Only the analog channel 1 supports this function. The IP channel does not support this function.
SMD, face detection function, and IVS function cannot be enabled at the same time.
5.11.2.1 Configuring Face Detection Settings
When the Device detects the human faces, the system activates alarms.
Select Main Menu > SMART DETECTION > Parameter > Face.
Face
Configure the settings for the face detection parameters.
To Next Page
Loading...
Need help?
General
