User’s Manual
297
Select Main Menu > SYSTEM > RS232.
RS-232
Table 5-82 RS-232 parameters
Function
Select serial port control protocol.
Console: Upgrade the program and debug with the console and
mini terminal software.
Keyboard: Control this Device with special keyboard.
Adapter: Connect with PC directly for transparent transmission of
data.
Protocol COM: Configure the function to protocol COM, in order
to overlay card number.
PTZ Matrix: Connect matrix control.
It is
by default.
Baud Rate Select Baud rate, which is 115200 by default.
Data Bits It ranges from 5 to 8, which is 8 by default.
Stop Bits It includes 1 and 2.
Parity It includes none, odd, even, mark and null. It is none by default.
5.20.3 Configuring System Maintenance Settings
When the Device has been running for a long time, you can configure the auto reboot when the Device
is not working. You can also configure the case fan mode to reduce noise and extend the service life.
Select Main Menu > MAINTAIN > Manager > Maintenance.
To Next Page
Loading...
Need help?
General
