User’s Manual
149
In the Alarm Box list, select the alarm box number corresponding to the address number
configured by the DIP switch on the Alarm Box.
In the Alarm-in Port list, select the alarm input port on the Alarm Box.
Configure the settings for other parameters of the Alarm Box.
Click Apply to complete the settings.
Click Default to restore the default setting.
5.10.2.3 Configuring Alarms from External IP Cameras
Select Main Menu > ALARM > Alarm-in Port > CAM Ext.
CAM ext
Configure the alarm input settings from the external IPC.
Click Apply to complete the settings.
Click Default to restore the default setting.
Click Copy to to copy the settings to other channels.
Click Refresh to refresh configured settings.
5.10.2.4 Configuring Alarms for IP Camera Offline
You can configure the alarm settings for the situation when the IP camera is offline.
Select Main Menu > ALARM > Alarm-in Port > CAM Offline.
To Next Page
Loading...
Need help?
General
