User’s Manual
52
Not all models are provided with reset button.
Disconnect the Device from power source, and then remove the cover panel. For details about
removing the cover panel, see "2.2 Installing HDD".
Find the reset button on the mainboard, and then press and hold the reset button for 5
seconds to 10 seconds.
Reset button
Reboot the Device.
After the Device is rebooted, the settings have been restored to the factory default. You can
start resetting the password.
5.1.4 Setting Up with the Startup Wizard
5.1.4.1 Entering Startup Wizard
The Startup Wizard helps you configure the basic settings to set up the Device.
After you have initialized the Device, the
Startup Wizard page is displayed.
To Next Page
Loading...
Need help?
General
