User’s Manual
62
Table 5-5 Parameter description
Channel
In the
list, select the channel that you want to configure the settings
for.
Smart Codec
Enable the smar
t codec function. This function can reduce the video bit
stream for non-important recorded video to maximize the storage space.
Type
Main Stream: In the
list, select
,
(Motion Detect), or
.
Sub Stream: This setting is not configurable.
Compression
In the
list, select the encode mode.
H.265: Main profile encoding. This setting is recommended.
H.264H: High profile encoding. Low bit stream with high definition.
H.264: Main profile encoding.
H.264B: Baseline profile encoding. This setting requires higher bit stream
compared with other settings for the same definition.
Resolution
In the Resolution list, select resolution for the video.
The maximum video resolution might be different dependent on your device
model.
Frame Rate (FPS)
Configure the frames per second for the video. The higher the value is, the
clearer and smoother the image will become. Frame rate changes along with
the resolution.
Generally, in PAL format, you can select the value from 1 through 25; in NTSC
format, you can select the value from 1 through 30. However, the actual range
of frame rate that you can select depends on the capability of the Device.
Bit Rate Type
In the
list, select
(Constant Bit Rate) or
(Variable Bit
Rate). If you select
, the image quality cannot be configured; if you select
, the image quality can be configured.
Quality
This function is available if you select
in the
List.
The bigger the value is, the better the image will become.
I Frame Interval The interval between two reference frames.
Bit Rate (Kb/S)
In the
list, select a value or enter a customized value to change the
image quality. The bigger the value is, the better the image will become.
Video Enable the function for sub stream.
Audio
Click
, the
page is displayed.
Audio: This function is enabled by default for main stream. You need to
manually enable it for sub stream 1. Once this function is enabled, the
recorded video file is composite audio and video stream.
Audio Source: In the
list, you can select
and
.
 Local: The audio signal is input from Audio In port.
 HDCVI: The audio signal is input from HDCVI camera.
Compression: In the
list, select a format that you need.
Audio Source
Compression
To Next Page
Loading...
Need help?
General
