19
z Type: Normal open or normal close.
z Period: Click set button, you can set alarm period. System can only generate an alarm in the specified
period. There are six periods in one day.
Please highlight icon
to select the corresponding function. After setting all the setups please click
save button, system goes back to the previous menu.
Figure 3-9
3.7 Remote Device
3.7.1 UPNP
Please connect the IPC to the PoE port of the device rear panel (Figure 3-10), system can auto connect to
the IPC.
Figure 3-10
3.7.2 Built-in Switch Setup
From Network->Network Server->Switch, you can set switch IP address, subnet mask, gateway and etc.
See Figure 3-11.
To Next Page
Loading...
Need help?
General
