Dahua DH-XVR5216A-X - 5.5.4 Configuring Overlay Settings

Local Configurations 98
Figure 5-65
Configure the settings for the snapshot parameters. See Table 5-25. Step 2
Parameter
Description
Manual Snap
In the Manual Snap list, select how many snapshots you want to take
each time.
Channel
In the Channel list, select the channel that you want to configure the
settings for.
Mode
In the Mode list, you can select Human Face, Event, or General as
the event type for which you want to take a snapshot.
Image Size
In the Image Size list, select a value for the image.
Image Quality
Configures the image quality by 6 levels. The higher the level, the
better the image will become.
Interval
Configures or customizes the snapshot frequency.
Table 5-25
Click Apply to complete the settings.
Step 3
Click Copy to copy the settings to other channels.
5.5.4 Configuring Overlay Settings
You can configure to display system time and channel name on each channel window in the live
view screen.
Select Main Menu > CAMERA > OVERLAY > Overlay. Step 1
The Overlay interface is displayed. See Figure 5-66.