User's Manual
7
2 Design
2.1 Appearance
Figure 2-1 Appearance
Table 2-1 Structure
No. Name Description
1 Indicator
●
Flashes green slowly: Reduced sensitivity mode.
●
Flashes green: The hub starts working.
●
Solid yellow: Failed to connect to the cloud.
●
Solid green: Disarming mode.
●
Solid blue: Arming mode.
●
Flashes red: Alarm event was triggered.
●
Flashes yellow: Detected a malfunction.
●
Flashes blue: Running AP configuration or the hub is
pairing with peripherals.
●
Flashes blue quickly: Card issuing mode.
2 Ethernet cable socket Connect the hub to the Ethernet.
3 Slot for micro SIM 1/2
Install main card to the first slot, and standby card to the
second slot.
●
Support dual SIM cards and single standby.
●
SIM cards allow the hub to use cellular data, and push
alarm notifications.
●
SIM cards will not work until network configuration has
been completed.
●
SIM function is only available on select models.
4 Tamper button
When the tamper switch is released, the tamper alarm will be
triggered.
5 Power cable socket Insert power cable.
6 AP
Turn on AP, the phone will connect to the hotspot from the
hub, and then sync Wi-Fi username and password to the hub.
To Next Page
Loading...
