User's Manual
17
Figure 4-5 Add through AP configuration
Step 9 Connect to the network.
1) Select Wi-Fi.
Make sure that your phone and the device are connected to the same network.
2) Enter Wi-Fi password, and then tap
Next
.
3) Flip the DIP switch from AP to STA, and then tap
Next
.
4) Wait for device to complete network configuration.
Figure 4-6 Connect to the network
Step 10 Tap
Completed
.
4.2.1.3 Adding by LAN Searching
You can search for devices and add them. Make sure that your phone and the devices are connected
to the same network.
Step 1 On the
Home
screen, tap , and then it goes to
Sites
screen.
Step 2 Tap on the upper-left corner to switch to
Device mode
.
Step 3 Tap to add a device.
To Next Page
Loading...
