User's Manual
33
account or scanning their QR code.
Step 3 Select device permissions for users based on your actual need.
Step 4 Tap
OK
.
The account that you shared the device with will appear on the
Shared User
section of the
Device Sharing
screen.
5.4.1.2 Adding Installers
For DMSS admin users, you can add installers by entrusting devices to them. You can entrust devices
to the installer one by one or in batches.
5.4.1.2.1 Entrusting Device One by One
Procedure
Step 1 On the
Home
screen, tap next to a device, and then tap
Device Entrusting
.
Figure 5-4 Entrust a device
Step 2 On the
Entrust to Company
screen, tap , and then scan the corresponding QR code of
the installer, or tap and import the QR code picture to entrust the device to the
installer.
You can ask installers for their QR codes.
Step 3 On the
Entrust to Company
screen, select entrusting periods, and company viewing
permissions, and then tap
OK
.
●
You must select at least one viewing permission from
Health Diagnosis Package
and
Alarm Management
.
●
Enterprise information will be automatically recognized after you scan the QR code of
the installer.
Step 4 View entrusting details on the
Entrust to Company
screen.
When successfully entrusted,
To be Reviewed
will change to
Delivered
.
To Next Page
Loading...
