GUI Operations 8
Enter password Figure 4-1
Configure the password information for admin. For details, see Table 4-1. Step 2
Password information description Table 4-1
By default, the user is admin.
In the Password box, enter the password for admin.
The new password can be set from 8 characters through 32
characters and contain at least two types from number, letter and
special characters (excluding"'", """, ";", ":" and "&").
In the Prompt Question box, enter the information that can remind
you of the password.
On the login interface, click , the prompt will display to help you
reset the password.
Click Next. Step 3
The Unlock Pattern setting interface is displayed. See Figure 4-2.
To Next Page
Loading...
