Dahua ITC231-RF1A-IR - Page 100

Please refer to the following sheet for log parameter information.
Parameter
Function
Date format
Select date format.
Time format
Select time format.
Current time
Set current system time. Setup becomes effective immediately.
Sync PC
Sync system time with PC time. Click on save to refresh system time.
DST
Set DST, may by date or week. Setup becomes effective immediately.
NTP setup
Check to sync with NTP.
NTP server
Set NTP server address.
Port
Set NTP port no.
Time zone
Set device time zone.
Interval
Set device update period.
6.5.6.2 Account
6.5.6.2.1 Account
Rule
Note:
 Account has two levels as group and username. Group supports max of 8 and username supports
max of 18. Default group includes admin and user.
 Group name cannot be repeated. Each user belongs to one group only. You may add and delete
group and set group. User right within a group can be customized as long as within right of the
group.
 Username and group names support max length of 15 characters which can be letter, number,
underline and dash.
6.5.6.2.2 Username
The username interface is shown as in Figure 6-93 Username. Here you can add and delete
username, and modify user password.