5 Quick Configuration Tool
By downloading and sign in Dahua Tool, you can get Quick Config Tool.
Quick configuration tool can search current IP address, modify IP address. At the same time, you can
use it to upgrade the device.
Note:
This manual makes ConfigTool 4.09.0 as an example. Please be aware that different versions
may have different operation interfaces.
Double click the “DH_ConfigTool.exe”icon, you can see an interface is shown as in Figure 5-1.
In the device list interface, you can view device IP address, port number, subnet mask, default gateway,
MAC address and etc.
Figure 5-1
5.1 Change IP Address
Step 1. Open Quick Config Tool.
Step 2. Click , see “Modify IP Address” interface.
To Next Page
Loading...