Dahua ITC231-RF1A-IR - Lane Property

Chart 6-6
6.3.4 Lane Property
Set lane info and configure event.
Figure 6-18
Parameter
Note
Lane Property
Snap Enable
Select lane you want to enable its snapshot, here no. correspond to
physical lane.
Roadway Code
Fill in roadway code.
Route Code
Fill in router code.
Lane
Select device snapshot lane.
Left Lane Line Type
Default is Solid White Line.
Right Lane Line
Type
Default is Solid White Line.
Event Config
Note:
Different lane types correspond to different event types.
ANPR
Select whether to snapshot ANPR vehicle.
Retrograde
Select whether to snapshot retrogradation vehicle.
Illegal Parking
Select to snapshot vehicle parked in authorized area.
Jam
Select whether to snapshot traffic jam event.
Pedestrian
Select whether to snapshot pedestrian.