4. Select “Place all certificate in the following store”, click “Browse” and set “Certificate Store”
to be “Trusted Root Certification Authorities”, click Next.
See Figure 6-71.
Figure 6-71
5. Click Finish. In pop-up Security Warning box, click OK. And click OK again.
6. Click OK.
Step 6. Select Enable HTTPs, click OK.
Device starts to reboot. After reboot complete, in Internet Explorer, enter http:// device IP, to
access the device.
6.5.4 Event
6.5.4.1 Alarm
6.5.4.1.1 Relay activation
The relay activation interface is shown as in Figure 6-72 Relay Activation.
Step 1. Select Setting>Event>Alarm>Relay Activation. \
To Next Page
Loading...