Dahua ITC231-RF1A-IR - 5.2 Upgrade Device

Step 3. Select device to modify IP.
 Single: Click of target device to change its IP.
 Batch modify: select device to change its IP, and click Modify IP.
Step 4. Set mode, IP, subnet mask and gateway.
Note:
When you modify IP, select “Same IP” as to set all IPs to the same one.
Figure 5-2
Step 5. Click OK.
5.2 Upgrade Device
It supports single or batch upgrade device.
Step 1. Open Quick Config Tool.
Step 2. Click , see Figure 5-3.