Figure 6-30 Video Analysis-ANPR
Step 2. Select line you want to draw.
Step 3. In video, draw out the line.
Note:
Click Redraw to delete current config line.
In lane direction, select head or rear to quickly switch lane line direction.
Please refer to the following sheet for log parameter information.
Means direction of moving, in two algorithm.
Select Vehicle Head: lane line downward.
Select Vehicle Rear, lane line upward.
Set detect region.
Select and click on redraw to drawn region as green box in Figure 4-8.
Draw lane according to actual condition.
Each lane requires two lines.
Arrow of lane represents moving direction.
Select and click on redraw to drawn region as blue box in Figure 4-8.
You can only draw in up/down direction.
To Next Page
Loading...